使用者登入

忘記了你的密碼?

详情

应用领域 我们的方法 涂层解决方案 涂覆商 防腐蚀学院 公司

DELTA-HEAT® 100

文章编号: 08405832


The silver, aluminum-containing, water-based DELTA-HEAT® 100 can be applied to a part at different times during the manufacturing process: this can happen before a hardening, forging or hot forming process. The coating cures at room temperature.Nice side-effect: coated parts are temporarily protected from corrosion.Under the influence of heat (up to a maximum of 1.200°C) the topcoat starts its work: the aluminum flakes in the coating melt. They create a hard, adhesive layer to the base metal – an aluminum oxide. This inert protection layer prohibits the oxygen, trying to enter the material from the outside, to move forward to the substrate. This leads to a reduction of the oxidation (the scale formation) of the substrate of up to 80 percent. All Dörken MKS products have always been free of harmful heavy metals such as chromium VI. As there is no hydrogen involved during the application process, there is no danger of application-related hydrogen-induced stress corrosion cracking.

类别

  • 高温
    高温
  • VH-面漆
    VH-面漆

表面/衬底

  • 高强度钢
  • 不锈钢
  • 典型的干膜厚度6-12 µm

应用技术

  • 喷涂
    喷涂
  • 浸滴
    浸滴
  • 刷涂
    刷涂

法律条件

  • 满足欧盟废车辆指令2000/53/EC
  • 满足RoHS 2指令(也称为欧盟关于在电气电子设备中限制使用某些有害物质指令2002/95/E)
  • 满足REACh要求

联系人

  • Emre Kocak

合适的零件选择

大部件

公制螺纹螺栓>M16

平板/钢坯

建议的零件

合适的零件

PDF